Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTA224 ERROR

Status
Not open for further replies.

Wesleywoo

Vendor
Joined
Aug 10, 2005
Messages
27
Location
CN
hello everyone my system have a error like this:DTA224 56 1;DTA224 56 7.ETC"

SO Who can tell me what's wrong on my system.my system is nortel network 81c.

thanks everyone

 
DTI loop audit has found channel (ch) to be in an invalid
HALFDISCONNECT state (trunk lock-up). An disconnect attempt is being
made on the CHNL.

check the fdec ndec and make then either (eth) your getting a near of far end disconnect that the switch does not ack. by making both eth, the switch will see the disco from either end and rls. the called/calling party hangs up 1st, the switch doesn't ack that so the trunk stays half disco until the audit, you get a code.. like most nortel codes it's telling you to check your data entry

john poole
bellsouth business
columbia,sc
 
thanks jhon poole can you particularly description again,I don't understand.

very thanks

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top