DT 422 1

[tsr9010461]

ll DECT (Only DT 422) stpped functioning. Tried restart of related PUs even at last RFEXI with12 LIM system BC11/SP11 but no solution. Anybody with an idea Pls.

 

[rfpui]

Is Your Magazin(s) (where ELU31 is/are instaled) LBP 20 or not?

 

[tsr9010461]

<SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 3-1-30-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT
It is ISDN connection (VOIP)

<cnbip:bpos=3-1-30;

DEVICE BOARD REVISION INFORMATION
DATE: 04AUG04 TIME: 15:57:04

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

003-1-30 TLU76 ROF1375338/1 R7A

END
And RPN are in the same LIM

FPI = 13 BPOS = 003-2-50

RPN OPERATING STATE BLOCKING STATE
1 OPERABLE NOT BLOCKED
2 OPERABLE NOT BLOCKED
3 OPERABLE NOT BLOCKED
4 OPERABLE NOT BLOCKED
5 OPERABLE NOT BLOCKED
6 OPERABLE NOT BLOCKED
7 OPERABLE NOT BLOCKED
8 OPERABLE NOT BLOCKED

All magzines are LBP 20

Cheers !

 

[rfpui]

CXCFP :FPI=13;
please

And if You have in this lim in mag 2 TLU20 it is a problem
In LBP20 can't be instaled ELU31 and TLU20 together

 

[tsr9010461]

Hi 1 Rfpui, we have four rpn initiated in LIM 3
<cxcfp:fpi=13;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00001 NORM
END
<cxcfp:fpi=6;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
6 003-2-40 123457BF 4 0 0 RING MASTER 11111 NORM
END

<cxcfp:fpi=14;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00001 NORM
END
<cxcfp:fpi=9;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
END

 

[rfpui]

Hi

If I good see the problem is with synchronization
Printout of CXCFP :FPI= is not correct.

Now from alex parameter synch info
D5D4D3D2D1
When a system installation has been completed, i.e. all ELU31 boards have been initiated, and all synchronization cables have been connected, the following applies:

D 1 and D 2 are always set to 1 (xxx11).

D 3 and D 4 (TX/RX ring strap) are set to 1 for the RING MASTER and all RING MEMBERs (x11xx).
D 5 (Bus cable) is set to 1 for the RING MEMBER or RING MASTER and the BUS SLAVE if BUS cables are used in the magazine (1xxxx).
Your printout should be look as below
<cxcfp:fpi=13;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=6;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
6 003-2-40 123457BF 4 0 0 RING MASTER 01111 NORM
END

<cxcfp:fpi=14;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=9;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
END

Are you using external synchro cable between board 3-2-40 to 3-2-42 to 3-2-50 to 3-2-52
If yes it is a problem. probably you have this connections because
Board 003-2-40 synch info =11111
D5=1

Next what I see is a sari number
I’m not sure but if I remember from course sari 12345678 is an test number end can be used only for system with one ELU31 board.

rfpui

PS
Look to Process TGML under submit post button and find how to send monospaced text
It is better to read and look printout from MD on this forum

 

[tsr9010461]

Hi ! Thanks everyone for their tips, but the problem is still there and Present situation is this:

CXCFP:FPI=ALL;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678


FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
3 004-0-52 123457BA 3 3 0 RING MASTER 01111 NORM
5 005-0-40 123457BC 1 0 0 RING MASTER 01111 NORM
6 003-2-40 123457BF 5 0 0 RING MASTER 01111 NORM
7 007-0-22 123457BE 3 0 0 RING MASTER 01111 NORM
8 006-1-40 123457B1 5 3 0 RING MASTER 01111 NORM
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
10 010-0-50 123457B0 2 0 0 RING MASTER 01111 NORM
11 011-0-20 123457B3 1 0 0 RING MASTER 01111 NORM
12 012-0-40 123457B2 1 0 0 RING MASTER 01111 NORM
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00011 NORM
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00011 NORM
15 007-0-62 123457B6 1 0 0 RING MASTER 01111 NORM
END

CNBIP:BPOS=3-2-40;

DEVICE BOARD REVISION INFORMATION
DATE: 06AUG04 TIME: 14:37:54

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

003-2-40 ELU31 ROF1375412/1 R2B
CAA 158 0010 R9A EXE
00 KRCNB 301 03/1 R1
CAH/KRCNB 301/3 R1G 1 EXE
CAH/KRCNB 301/3 R1G 3/02 EXE
01 KRCNB 301 03/1 R3
R3C 2 R3C 2 EXE
CXCNB 101 108/3 R3E 3/06 EXE
02 KRCNB 301 03/1 R2
R3B 2 R3B 2 EXE
CXCNB 101 108/3 R3B 3/06 EXE
03 KRCNB 301 03/1 R2
R3B 2 R3B 2 EXE
CXCNB 101 108/3 R3B 3/06 EXE
04 KRCNB 201 03/1
CAH/KRCNB 201/2 R2B R2B 0 EXE
CAH/KRCNB 201/2 R2B R2B 1/01 EXE

END
SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 3-1-30-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT

END
note : Except LIM 3 all are remote LIMs where FPIs are sitting.
* for TGML tip
Cheers
img

http://www.mysite.com/images/happy.gif

 

[rfpui]

Hi
Your DT 422 are can’t registered in only LIM 3 area or in another LIM, too?
You have two ELU 31 boards in LIM 7 FPI=7 and 15 why this both board’s have synch role 01111?
Rfpui

Thanx for little *
But lesson two.
If You send by this forum printout from fiol use MonoSpaced option.
Square bracket (left) tt square bracket (right)
Copy from memory /fiol/ to text window
Square bracket (left) /tt square bracket right

 

[tsr9010461]

Hi ! Rfpui
LIM 7 is at a distant location I will be going there tomorrow and let you know.
Chao !

 

[tsr9010461]

Sorry ! Problem is still unresolved with all LIMs in terms of registration.

 

[rfpui]

Hi
How looks Your problem
Stupid question: Are you trial reinitialize DT extension by CXAKE / CXAKI?
My by with GEDIE /GEDII ?
And Erase system from DT menu-> system

and why your SARI is 12345678

 

[tsr9010461]

We tried both ways you mentioned. There is a last resort to change LSU sitting in LIM3, we gonna do this weekend. This SARI is there eversince we installed DECT telephony with 368 type about three years ago.