DSU blocked

[lpb612]

Hi friends!

I have a MD110 BC8 and the alarm code 103 (THE DSU BOARD IS
BLOCKED BY COMMAND) showed in ALLIP command, but I didn't
block the board and I don't unblock this board. What’s
happening?
Thanks!

<ALLIP;
ALARM LIST
IDENTITY: TELECO
VERSION: LZY2030812/3/R1A/BC81A

DATE: 04FEB09 TIME: 12:04:18
CODE CLASS NOAF EXPLANATION
15 2 6 DEVICE BOARD FAULTY OR MISSING
103 2 1 THE DSU BOARD IS BLOCKED BY COMMAND


<ALLOP;
ALARM LOG
IDENTITY: TELECO
VERSION: LZY2030812/3/R1A/BC81A

DATE: 04FEB09 TIME: 12:04:23
CLASS: 2
103 THE DSU BOARD IS BLOCKED BY COMMAND
DATE TIME ALP NOIF EQU INF1
04FEB09 11:47:16 1 1 005-0-**-** 0

 

[doktor]

It seems that someone send this command to block the DSU:

LSBLI:LIM=5,DSU=0;

Just de-block it by:
LSBLE:LIM=5,DSU=0;

Check the LSU/DSU by:
LSCNP;
and
LSFTI:LIM=5,FULL=YES;

You will obtain a printout about the status on the LSU/DSU states in LIM=5:

Status explanation:

1. OK The board is OK.
2. SYSTEM BLOCKED The board is system blocked.
3. MANUALLY BLOCKED The board is manually blocked.
4. FAULTY The board is marked faulty.
5. NOT EQUIPPED The board does not exist in the LIM.
6. NO CONTACT There is no contact with the board.






///doktor

 

[lpb612]

Thanks Doktor! The DSU unblocked and its status is OK.

 

[doktor]

Nice to hear your status update on this issue!

///doktor