FWTM 4 1 2 2 (This is the way you must enter it)
4 month = APRIL
1 week = 1st week oin the month
2 day = Saturday (!st saturday in month)
2 hour = 2AM
BWTM 11 1 2 2 (This is the way you must enter it)
11 month = NOV
1 week = 1st week of the month
2 day = Saturday (1st saturday in month)
2 hour = 2AM
To implement these commands, use the following.
• FWTM <month> <week> <day> <hour>
month = 1-(4)-12 [January-December]
week = (1)-5, L [1st-5th, L is the last week of the month]
day = (1)-7 [Sunday-Saturday]
hour = 1-(2)-22 [Midnight-11:00 pm]
• BWTM <month> <week> <day> <hour>
month = 1-(10)-12 [January-December]
week = (1)-5, L [1st-5th, L is the last week of the month]
day = (1)-7 [Sunday-Saturday]
hour = 1-(2)-22 [Midnight-11:00 pm]
• SDST ON, (OFF)
ON enables the automatic change capability
OFF disables the automatic change capability
• TDST <CR>
The output reflects the input format to indicate the change information.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.