DSS ON LIP-8040L 1

[nightwolf91]

I am trying to connect a 12 button DSS module to a 10 button 8040L i.p. telephone on a LIK50A. I must be missing something because I have serial DSS allowed in Pgm 111 for stn 103. I am using web admin and in Pgm 110 when I choose DSSDLS1 (map1) for station 103 and enter the associated station number of 103 and click save nothing is saved. The same thing happens when I try using phone admin to program this. Any guidance with this would be greatly appreciated.

nightwolf

 

[doktor]

What type of DSS are you having problems with?
LG-Ericsson LIP-12LSS 12 Button DSS LCD (LIP-12LSS )?
or
LG-Ericsson LIP-40LSS 40 Button DSS LCD (LIP-40LSS )?

To my knowledge, this should work.

///doktor

 

[nightwolf91]

Hi doktor,

It's the LIP-12LSS.

 

[doktor]

Do you get any error messages? Do you install this DSS on the attendant? Did you try this on other station numbers?

///doktor

 

[nightwolf91]

Hi doktor,

No I haven't tried it on any other telephones but I will give it a try. LG tech support says the 12 button LSS does not use or take a station number and it does not need to be associated with a phone.

nightwolf

 

[xs650]

when you connect the 12 button LSS you should have the buttons 49 to 96 in flex button programming of the connected station.
BR
XS

 

[nightwolf91]

I discovered that it works on a brand new 8012E set but not on my 8040L or 8012D.
Must be a firmware issue with the 'D' type sets.....maybe a bad bunch from LG-Ericsson. You were right xs650. The programming does start at flex button 49 on the 12 button LSS.

Thanks for all the replies.

nightwolf