Drivers Win95 ATX Form Card

[marieannie]

Hi!, I have an ATX form card (1) PS/2 mouse port, (1) Inferred communications port and (2) USB ports.

I have Windows 95 and my computer doesn't detect the ATX Card. I don't know if there are drivers available.
Or what can I do in order to make work this card?

Can Anyone help me?

Thanks a lot

 

[Blujacket]

ATX is the form of the motherboard and case. The card you have must be a PCI card [based on the USB ports] and if new should have had a driver disk with it. On Win95, only the last 2 versions had any USB driver support in them and then it was hit-or-miss as to whether it worked. Is there any brand name or model number on the card.

 

[marieannie]

yes, it has S TECH 94V-0 9842. And the card isn't new. I'm trying to install a printer using USB port. But I fount out that Windows isn't recognizing the card.

 

[marieannie]

Can anyone help???

 

[Blujacket]

I think the model number you listed is actually for the circuit board itself. Look on the square black chip for a make and model. Also be aware that the first 2 versions of Win95 didn't support USB and the last 2 versions were quite hit-or-miss [mostly miss] in their support of USB.

 

[ANFPS26]

Does your printer have Windows 95 USB drivers? There were very few Win 95 USB drivers. If you got USB working on Win 95, you still couldn't find many drivers written for it. You may have to upgrade to Win 98.

Jim