Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Driver for PCI Mass Storage Controller 1
- Thread starter UTTech
- Start date
-
1
- #3
CitrixEngineer
Technical User
If it's a BE6, it won't have any mass storage, so you're probably talking about an add-in card, such as a Promise IDE RAID controller, Abit HotRod, etc.
If it's a BE6-II, then you've got a Highpoint RAID controller onboard, and the driver is here
...or if it's a BE6-II v2.0, then the driver is here
Make sure you get exactly the right driver for your motherboard - make sure also you know which version it is. Highpoint 366 drivers won't work with a 370 controller, or vice versa.
I hope this helps
If it's a BE6-II, then you've got a Highpoint RAID controller onboard, and the driver is here
...or if it's a BE6-II v2.0, then the driver is here
Make sure you get exactly the right driver for your motherboard - make sure also you know which version it is. Highpoint 366 drivers won't work with a 370 controller, or vice versa.
I hope this helps
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
