celticrainbow
Technical User
I have been away from Quark for quite some time and for the life of me cannot remember how to double space a page. I have looked in my manuals but find nothing. Can anyone help? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Double Spacing in Quark
- Thread starter celticrainbow
- Start date
- Status
IMacQuarker
Technical User
hi celticrainbow
I'm not sure what you mean by double spacing.
If you mean for typewriter spacing, that would be single spacing at 12 point leading or 6 lines to the inch and double typewriter spacing would be 24 point leading or 3 lines to the inch.
However if you just want to double space between your text then if you have 10 point text on 11 point or whatever just double it to 10 point on 22 or whatever looks good to you.
You can highlight text and go to the bottom and the right arrow lets you increase of decrease leading or you can go under edit format and change it there.
Hope this helps.
IMacQuarker
I'm not sure what you mean by double spacing.
If you mean for typewriter spacing, that would be single spacing at 12 point leading or 6 lines to the inch and double typewriter spacing would be 24 point leading or 3 lines to the inch.
However if you just want to double space between your text then if you have 10 point text on 11 point or whatever just double it to 10 point on 22 or whatever looks good to you.
You can highlight text and go to the bottom and the right arrow lets you increase of decrease leading or you can go under edit format and change it there.
Hope this helps.
IMacQuarker
- Status
Similar threads