I have static NAT setup on my Cisco 1605R router IOS v11.1.12(A). I know this is an old IOS, but the customer does not want to upgrade the IOS, since they are purchasing some FW's from another vendor.
Here is the issue:
Users who dial up to an ISP can connect to my internal ftp server fine. They can do all work that they need.
Users who have full time access (DSL, CABLE) that are using some type of router running IP Nat can not connect to my internal host. They connect and successfully authenticate but can not put/get or list on the internal ftp server.
Any help would be appreciated!
Tia,
Jamie
Here is the issue:
Users who dial up to an ISP can connect to my internal ftp server fine. They can do all work that they need.
Users who have full time access (DSL, CABLE) that are using some type of router running IP Nat can not connect to my internal host. They connect and successfully authenticate but can not put/get or list on the internal ftp server.
Any help would be appreciated!
Tia,
Jamie