Doorbell

[diegosaletti]

good morning guys

I have a doubt, I need to install a doorbell that played when an alert is sent to a phone, doing the work of intercom.

I could not find any manual on how to do this.
Anyone know how to proceed?

ps: Ipo500v2 8.0.46

thank you.

 

[diegosaletti]

another thing ...

there is some type of bell that is compatible with IPO500? make, model?
already had some experience with this?

tks

 

[Westi]

easiest solution is to take an analog port and put s contact closure device on it, then you can use any door bell or device that uses a button to trigger it.

Joe W.

FHandw, ACSS (SME), ACIS (SME)

http://convergednetworks.ca

Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.

 

[diegosaletti]

Thanks Westi.

I'll try this tip.

 

[Westi]

NP
Good luck

Joe W.

FHandw, ACSS (SME), ACIS (SME)

http://convergednetworks.ca

Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.