Door Phone and Hunt Group?

[MJSD333]

Hello,
I setup two Nortel door phones at a customer site. Also I connected DOC's to both. They open the doors every time. The problem is, I setup a hunt group to answer the door phones. Set the door phones to answer the HG 001 DN .3rings.
I set the members of the group 3 total.I didn't assign any lines to the group. It is Sequential,3 rings,ring only, Queue, Queue time out 45, I can't remember how I set the other settings. Pretty much the usual settings.The first DN in the group will ring. If it is unanswered it doesn't hunt the the next DN member. The display just says Door phone calling and goes away after three rings. I'm missing something but don't know what.
Dmac,

 

[GoldenGirls]

I set some up befor and i programed the door phone to a dn, And the others exts i wanted to ring i went to those and setup answer dn, The door phones dn works fine..

 

[MJSD333]

GoldenGirls,
I have the answer DN thing setup now as a temporay fix. They would really like to have it in a hunt group.That way all the phones don't ring at the same time.
Dmac,

 

[GoldenGirls]

Not sure about the hunt group,but you could setup up answer dn like you have then fna to next ext and so on ,that may be better, cindy