I am about to setup a VPN at a main office that has an existing Win NT4 server domain using a DSL connection. At my home office I have a Win NT4 domain and a dial-up connection to the internet (no DSL available yet). What steps do I need to look at to setup a trust relationship between the two domains when I setup the VPN?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Domain Trusts Over VPN
- Thread starter techshoot
- Start date
I'm afraid you will need a hardware VPN solution for this... or install Win2K at both ends...
-> then you can create dila-on demand routes (so a VPN link is automatically build when traffic from siteA wants to go to siteB and vice versa...
(as long as both sites are in a different IP subnet of course) ---------------------------------------------------------------------
I have not failed, I've just found 10,000 ways that don't work
---------------------------------------------------------------------
Peter Van Eeckhoutte
peter.ve@pandora.be
*:->* Did this post help? Click below to let me know !
-> then you can create dila-on demand routes (so a VPN link is automatically build when traffic from siteA wants to go to siteB and vice versa...
(as long as both sites are in a different IP subnet of course) ---------------------------------------------------------------------
I have not failed, I've just found 10,000 ways that don't work
---------------------------------------------------------------------
Peter Van Eeckhoutte
peter.ve@pandora.be
*:->* Did this post help? Click below to let me know !
- Status
Similar threads
- Locked
- Question
- Locked
- Solved