Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

do not disturb

Status
Not open for further replies.
kce9751

kce9751

Programmer
Joined
Nov 18, 2008
Messages
59
Location
US
Can Do not disturb be put on 1 single phone that is not an attendant phone. If so, how?
 
Sort by date Sort by votes
Program a MSB key on the set.

War Eagle!!
 
Upvote 0 Downvote
That stands for "make set busy" by the way. It acts like a DND button.

War Eagle!!
 
Upvote 0 Downvote
This is a 500 analog set.
 
Upvote 0 Downvote
Oh. Sorry. Create Make Set Busy activate and deactivate FFC codes in LD 57. the prompts are MSBA and MSBD.

War Eagle!!
 
Upvote 0 Downvote
Configure a DND FFC in LD 57, then enable CLS CCSA for the sets that need to use DND.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

akak247
  • Question Question
Cs1000e 7.6 blind transfer not working
Replies
1
Views
139
merton888
M
Option11PLM
  • Locked
  • Question Question
MGXPEC - NT8D09 cards are working but phones do not appear to be powered up & no tones (dial, ringing, etc.)
Replies
2
Views
566
dianvaguar
dianvaguar
BCU
  • Locked
  • Question Question
Caller id is not getting displayed
Replies
3
Views
842
gbtac3
gbtac3
John Tel
  • Locked
  • Question Question
CS1K Signaling Server partition full /dev/hda10 (Not the normal /var issue). Directory not working.
Replies
4
Views
1K
John Tel
John Tel
HollTel
  • Locked
  • Question Question
TTY not working on a CS1K Rls. 7.0
Replies
2
Views
747
HollTel
HollTel

Part and Inventory Search

Sponsor

Back
Top