I recently installed optivity 9.0.1 on a Windows 2000 advanced server and I cant get autotopoly to work. I tried a suggestion listed in one of the posts but it didn't work for me. I can use ominiview and get info for all printers, hubs, router, and servers. When autopology runs it detects my router, our isp provider's router, it then times out and stop all searches.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Do I need communtiy strings
- Thread starter muvon
- Start date
sysmanrick
Technical User
If all your equipment is BAY,you don't need to modify the community strings.Try setting strings to public.If Optivity has discovered your printers and id'd them correctly your community strings seem to be working.
Check your Bay routers to see if SNMP is enabled.
GOOD LUCK
Check your Bay routers to see if SNMP is enabled.
GOOD LUCK
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question