Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

dlttape-VRST

Status
Not open for further replies.
crleacock

crleacock

Vendor
Nov 29, 2001
33
US
I've been running Backup Exec 9.0 on an NT4.0 server and have just upgraded the server to W2K. Now, when the server reboots I get Event ID: 7026 in the event log that says, "The following boot-start or system-start driver(s) failed to load: dlttape-VRTS." Any ideas?
 
Sort by date Sort by votes
try to install device driver for w2k of your tape driver
 
Upvote 0 Downvote
1. verify that the drive is supported (although, since it was working previously, it should be)
2. install the latest Veritas driver
3. if that doesn't work, do as sakarya suggested and install a W2K driver
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

satchi
  • Locked
  • Question
Backup tapes error (Maxell DLTtape IV)
Replies
7
Views
105
satchi
satchi
cygnul
  • Locked
  • Question
dlttape-VRTS error
Replies
0
Views
41
cygnul
cygnul

Part and Inventory Search

Sponsor

Back
Top