Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

distributed shell or parallel commands

Status
Not open for further replies.
screwloose

screwloose

MIS
Apr 13, 2004
316
US
On my SP complex I can use the distributed shell (dsh), parallel commands (pcp), and also use SP commands (splstdata) to retrieve information from all hosts in the complex, e.g., all IP's for all ethernet adapters.

Is there a similar tool for Solaris? I have about 50 Solaris servers and I don’t care to login 50 times and run the same command 50 times. On my SP, I can run once from the CWS and get what I need on all 80 nodes.

Thanks.
 
Status
Not open for further replies.

Similar threads

austinramsay
  • Locked
  • Question
Solaris 10 install hanging at 3%.. Where to find log file, or ideas?
Replies
1
Views
679
AvayaTier3
AvayaTier3
mmalefho
  • Locked
  • Question
shell script giving an error
Replies
2
Views
247
SamBones
SamBones
forrie
  • Locked
  • Question
Oracle Solaris 11 and creating iSCSI LUN problems
Replies
0
Views
224
forrie
forrie
ddrillich
  • Locked
  • Question
curl or wget 2
Replies
4
Views
366
ddrillich
ddrillich
omega4ever
  • Locked
  • Question
Order of disks in output of format command
Replies
0
Views
218
omega4ever
omega4ever

Part and Inventory Search

Sponsor

Back
Top