Distinctive Ringing. 1

[SCO1010]

I have a lobby phone that appears on a 3904 set with CLS DRDA on.

When I try to add the DN to another 3904, I get a SCH1414- which says an appearace of this agent DN has CLS FXSP.
Action: Out the appearance in LD 11.

I look at the CLS and it says Flexible Services port.

What can I do to get this DN to ring on other 3904s?
Any ideas? Any input would be greatly appreciated.

 

[johnpoole]

out all appearences of the dn, sounds like a corruption in an opt 11.. might be a set auto relocate problem, those used to cause those type of problems.. if outing all copies of the dn doesn't help, i would schedule an ini... that problem can schedule it's on ini so procede with caution

john poole
bellsouth business
columbia,sc

 

[SCO1010]

Thanks John for your post.
I removed the DN from the 3904 and then outed the analog TN and rebuilt it and put it back on the 3904. Still same issue. Cannot add it to another phone. I turned off DRDA and still have the same issue.
What is a Flexible Service port anyway?
The system is an Option 61 C, Succession 3.0.

Do you want a screen shot of the two phones?

 

[janchundia]

post the programming for the 3904.

 

[SCO1010]

Posting CLS.

DES 04051
TN 020 1 04 04
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 58700
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN

CPND_LANG ENG
RCO 0
HUNT 58700
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0

 

[PHONEMANDAN]

OUT ANALOG TN THEN ADD NEW DN TO NEW SET THEN REBUILD ANALOG SET.
HAD SAME PROBLEM ONCE AFTER SUCCESSION UPGRADE.