Distinctive ringing configuration

[bad69cat]

OK, I know this is possible, - just not sure how to do it. The security guys want our 7911 keys to ring different than the primary keys on thier 2616 sets. I don't believe I have ever played with that feature and thought I would ask you guys how I could configure that? These would be calls internally if that makes a difference....I'd want it to ring distictively no matter where the call coems from ultimately. Thanks in advance!

 

[GHTROUT]

In the feature books, it is called Distinctive ringing by DN. Add CLS DRDA to their TN

Then experiment with the new prompts that show up after you enter an SCR/MCR:

DNRO is the ring others hear when you call them; DNRI is the ring you hear when others call you.

In the example below, 5555 rings different than 2668

[tt]
02 SCR 2668 D
__ DNRO 0
__ DNRI 0
03 SCR 5555 D
__ DNRO 0
__ DNRI 2
[/tt]

~~
Gene at GHTROUT.com

 

[bad69cat]

OK - I'll give it a shot. I'll play with my own set first and see if I can get it going on that. Thanks!!

 

[bad69cat]

that was super easy! Looks like putting a different number in for DRNI doesn't really change the sound for each number you choose. They all seem to be a similar stutter.....but it works! Thanks

 

[GHTROUT]

Those numbers have some mystery behind them - they are defined in the Flexible Tones and Cadences datablock, which I do not like to edit - it is easier to just try different numbers and see

~~
Gene at GHTROUT.com