these cards are beaut... you can have so much open and see it all without juggling screens but there are some silly things...
1. In preview of reports (both full page and zoomed in) there is a horizontal compression of at least 70% (very hard to read, if you can even do that)
2. working in projects some SCX's display to proper height but only same width as minimised screen. Maximise works but can't drag out to an intermediate width although can drag height. Only affects a few screens, and usually same ones each time but not on all occasions. Once it happens it continues happening until FPW is restarted.
am running under W2000 professional on P3 850
would really appreciate any suggestions
Ted
1. In preview of reports (both full page and zoomed in) there is a horizontal compression of at least 70% (very hard to read, if you can even do that)
2. working in projects some SCX's display to proper height but only same width as minimised screen. Maximise works but can't drag out to an intermediate width although can drag height. Only affects a few screens, and usually same ones each time but not on all occasions. Once it happens it continues happening until FPW is restarted.
am running under W2000 professional on P3 850
would really appreciate any suggestions
Ted
