Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Display Parameters - SIP

Status
Not open for further replies.
wpetilli

wpetilli

Technical User
Joined
May 17, 2011
Messages
1,877
Location
US
Do the settings in CM for display parameters apply to SIP phones? Trying to have my e.164 number shortened to 4 digits on the call-appearances. It works via H.323, but not on SIP, unless I'm doing something wrong.
 
Sort by date Sort by votes
You can do it with an adaptation regex in System/Session Manager.
 
Upvote 0 Downvote
Are the phones showing PPM/AST enabled after registering? I thought display parameters applied to CM SIP stations, but I could be wrong.
​

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

hebegb41
  • Locked
  • Question Question
Converting 1 SIP carrier to another
Replies
1
Views
332
dialtonebone
dialtonebone
lexer
  • Locked
  • Question Question
Avaya phone set 4610SW SIP firmware
Replies
2
Views
445
lexer
lexer
letman2
  • Locked
  • Question Question
EZ500 with sip trunks
Replies
3
Views
645
ZeroZeroOne
ZeroZeroOne
wallot
  • Locked
  • Question Question
One way Audio - Incoming SIP call to 9408
Replies
1
Views
280
dialtonebone
dialtonebone
Alaskatelecom
  • Locked
  • Question Question
SIP J179 and Call Park - not working
Replies
3
Views
634
ZeroZeroOne
ZeroZeroOne

Part and Inventory Search

Sponsor

Back
Top