Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Diskkeeper V5 Scan Abort

Status
Not open for further replies.

tls9923

Technical User
Joined
Aug 7, 2002
Messages
155
Location
US
I am trying to anaylze the d: NTFS partition of a NT 4 Server. I am getting about 30% done when I get a
Scan NTFS
Scan Aborted
Fatal Error
File, Pagefile.sys

Thanks

Terrel
 
Try removing the pagefile from the D:\ to the C:\ temporarily, and see if that fixes the problem.

It sounds like you might have a corrupt pagefile. [auto] MCSE NT4/W2K
 
I do not have space on the C parition to move the pagefile.sys, so Can I just delete the pagefile.sys and then reboot the system to have the file rebuilt?

Thanks
 
No. You must have a pagefile or the system won't run.
You can have a small page file though, albeit not recommended. [auto] MCSE NT4/W2K
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top