Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disk Array options MAP 40
- Thread starter DFM
- Start date
RAID The impact of disk failures is greatly reduced with the use of Redundant Array of Independent
Disks (RAID). RAID is a method of providing complete data redundancy using a minimum
amount of storage capacity for storing the information. RAID allows for greater disk capacity
per disk and mirroring of the information contained on the disks. Two forms of RAID are
available with Lucent Intuity Release 5.
n RAID level 1 is offered on the MAP/ 40P models. RAID level 1 provides a high level of
data availability through disk mirroring where a duplicate copy of the data from one
disk drive is copied and stored on another disk drive.
Da-vi'do
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.
Disks (RAID). RAID is a method of providing complete data redundancy using a minimum
amount of storage capacity for storing the information. RAID allows for greater disk capacity
per disk and mirroring of the information contained on the disks. Two forms of RAID are
available with Lucent Intuity Release 5.
n RAID level 1 is offered on the MAP/ 40P models. RAID level 1 provides a high level of
data availability through disk mirroring where a duplicate copy of the data from one
disk drive is copied and stored on another disk drive.
Da-vi'do
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.
- Thread starter
- #4
To retrieve the RAID controller circuit card status:
1. Start at the Lucent Intuity Main Menu and select:
Customer/ Services Administration
Diagnostics
Disk Status/ Diagnostics
Query Device Status
Controller Card
The system displays the RAID Controller Circuit Card Information Screen
1. Start at the Lucent Intuity Main Menu and select:
Customer/ Services Administration
Diagnostics
Disk Status/ Diagnostics
Query Device Status
Controller Card
The system displays the RAID Controller Circuit Card Information Screen
- Status
Similar threads
- Locked
- Question