spacebass5000
Programmer
How would one go about disabling the RAID functionality on a Netfinity 7000 M10?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disabling Raid on a Netfinity 7000 M10
- Thread starter spacebass5000
- Start date
- Status
- Thread starter
- #3
spacebass5000
Programmer
ok... this is what I thought... And yes, there is a ServeRaid card providing this functionality at present...
Thanks!
Thanks!
A word of caution. If you remove the ServeRAID controller, the SCSI controller will not have the data. You will have to restore the complete image from backup. I don't know why you would want to remove the RAID functionality. If it's regarding the "slow" I/O, please read my post about that in the other thread.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question