Does anyone know of a way to disable the Function Key F11 and the SHIFT key at start-up, so that a user cannot get to the underlying tables and queries of an Access 2000 database. I have set the database up to run all functions from menus and forms but some users try to bypass the menus and forms by using the shift key at start of database and/or the F11 key to get to the underlying tables to manipulate the data.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disabling F11 Key
- Thread starter tpearo
- Start date
Doing the above works for all but the wise-guys who know the bypass trick.
Disabling the bypass key can be done. There's a good article in the "General" section at this site (The Access Web--which is the only other site I consult for Access info).
Disabling the bypass key can be done. There's a good article in the "General" section at this site (The Access Web--which is the only other site I consult for Access info).
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
