DISA 1

[exmcier]

Is it possible to change class of service on a DISA DM to FRE?
I'd like to continue to use the DISA DID/DN so that I can remote call forward with our RFC flexible feature code, but I don't want the DISA to be used to outdial using trunk codes.

 

[GHTROUT]

Of course. You can pick from these possible CLS values:

http://www.ghtrout.com/files/CLS_Restrictions_Matrix.html

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[exmcier]

Thanks GHTROUT!. Already bookmaked your URL, I'm sure I'll be referencing it quite a bit.

 

[exmcier]

When I set CLS to FRE and dialed the DISA #, I noticed that secondary (PBX) dial-tone is now being played. I don't want to insert any digits (DGTS),does anybody know how to turn-off secondary DT?

 

[GHTROUT]

I think Secondary Dial Tone indicates there is a SCOD. Entering "X" removes it.


--
Nortel Resources at GHTROUT.com World Famous!
--

 

[exmcier]

Thanks GHTROUT, I think I'm going to have to scratch my head and have another think about this one.

Removed SCOD, still getting secondary DT. I then put SCOD back in and figured I'd set up LD 24 RANR with a generic, interruptable announcement so as to give the appearance to any one looking to hack that this is a valid inbound ACD DN but for some reason RANR is rejecting the RAN route # that I am typing in.