Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Directional traffic flow/weighting

Status
Not open for further replies.

stormster

MIS
Sep 19, 2004
2
GB
I have a core network of 4 6509's connected by les 100's. the traffic flow settled with a particular 'redundant link' such that 2 sites were 'daisy chained' and one was 'on a stick'. After replacing one cat's sup1a's with sup720's, the traffic flow changed direction flowing the opposite way round from the sup720 cat.

We arent using RIP or OSPF, can i 'weight' the traffic such that it reverts back to it's original flow paths?

I can force it by shutting down a particular interface, but this defeats the redundancy we have.
TIA

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top