Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Direct trunk

Status
Not open for further replies.

hafid2016

Technical User
Joined
Mar 14, 2016
Messages
6
Location
MA
Hi all could you tell me how to assign a trunk direct incoming calls to a subscriber in a Hicom 300
 
For Analog Trunks:
REG-TACSU;
CHA-TACSU:PEN=1-1-1-1,DGTPR=XXXX;
There may be other questions like device type but that will be the same as the existing trunk setup.
The main change is DGTPR which is 'Digit Prefixing'
A COT Parameter DITW has to be added to the COT of the Trunk as well
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top