Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Digital Line Card Problem

Status
Not open for further replies.

jtphoneman

Programmer
Joined
Dec 18, 2004
Messages
187
Location
US
I had a bad lightning storm last night and have serval 2008 and 3904's out this morning. Looking at the switch there are 3 Digital Line cards that have red leds. When I replace them the same red led appears? Any suggestions?
 
Sometimes when nothing else works, an INI or A SYS will.
 
INI did not help,looks like the Network card that runs
4 0 x x and 4 1 x x is not enabling after the INI
 
Nortel just called the local telco repairman, I will let you all know what happens or what they find.
 
A bad controller card in each shelf 4 0 and 4 1. A bad network card in core 0.
 
makes sense... lighting is like water, it flows downhill.. took out the dlc, next card in line the controller, then the net, then the cni then the cpu... i usually trouble shoot with that in mind...

john poole
bellsouth business
columbia,sc
 
Thanks for all the good advice and help yesterday!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top