Digi set lock out

[speckledhen]

Hi all
I know it's been covered before but I cannot seem to find it anywhere. How can I stop a digi set disabling after it has been unplugged? can it be done on an individual extn (CLS?) or is it done system wide?

Thanks

 

[johnpoole]

you can do either, i don't recogmend it but you can remove 30 from your drol and they will all stay up. there is a cls mark but i'm not looking at the books right now. the auto disable is a backhand way for nortel to keep the switch up for years at a time without a reboot.. keep it disabled long enough and you'll get a few high traffic ini's for your trouble..

john poole
bellsouth business
columbia,sc

 

[roupe]

Removing LD 30 from DROL prevents processors from switching during MIDN routines...If your on Opt11..shouldn't matter.

 

[Johnthephoneguy]

The newer systems do not Switch during MIDN anyway. he didnt mention what he is running.

 

[speckledhen]

Hi Again
Sorry I should have said its option 11

 

[GHTROUT]

Add FLXA to the CLS

~

http://www.GHTROUT.com/

faq798-6246 faq798-6217 faq798-6218 faq798-6219 faq798-6297

 

[johnpoole]

FLXA for some reason i have to look that cls mark up every time, guess it's because i almost never use it.

john poole
bellsouth business
columbia,sc