Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DID with Nortel Switch

Status
Not open for further replies.
AJA7

AJA7

Technical User
Oct 11, 2003
14
PR
Hello,

I have a S8700 that is connected to the Carrier via a PRI.
I have DID's configured by the carrier's Nortel Switch. The DID only work when I program the Trunk Group in Digit handling overlap/overlap. It does not work when the trunk group is program enbloc/enbloc. My problem is that when I configure it with overlap I have to configure a station with the last 4 digits of the DID causing me a conflict with an existing station.
 
Status
Not open for further replies.

Similar threads

Vivek2005
  • Question
Hello all, Did any did upgrade of Avaya Session manager from 8.1.3.9 to 10.2.1 upgrade? 1
Replies
8
Views
412
dialtonebone
dialtonebone
telecomadmin12
  • Locked
  • Question
Intra-Switch-CDR capacity 1
Replies
1
Views
283
AvayaTier3
AvayaTier3
Vidmine
  • Locked
  • Question
Block calls on DID 1
Replies
3
Views
538
Vidmine
Vidmine
T
  • Locked
  • Question
Avaya G450 with ACCM
Replies
2
Views
419
nutrinoman
nutrinoman
letman2
  • Locked
  • Question
EZ500 with sip trunks
Replies
3
Views
422
ZeroZeroOne
ZeroZeroOne

Part and Inventory Search

Sponsor

Back
Top