Did Insight Manager Hosed my Server?

[Guest_imported]

I installed Insight Manager on a Compaq ML350 with Windows NT Small Business Server. Now if it does not reboot within 3 miniutes, it is giving me a Unexpected_Kernal_mode_trap (with a stop error at 0x0000007f.) I tried replacing the memory. I cannot access the server long enough to disable the services. I cannot access the server from another NT workstation on the network long enough to edit the registry remotly. Am I screwed. This lug of nuts took a LONG time to load. Any ideas?

 

[Dingeycat]

Stop Error 0x0000007F
Stop error number: (0x0000007F)

Descriptive text: UNEXPECTED_KERNEL_MODE_TRAP

Usual cause: Usually caused by hardware or software problems, but the most common cause is hardware failure.

To troubleshoot Stop error 0x0000007F
Check the Microsoft Hardware Compatibility List to verify that all your hardware and drivers are compatible with Windows 2000. An incompatibility with the motherboard on the computer might be the cause of this problem.
To see the most recent version of the HCL, visit the Microsoft Web site:

http://www.microsoft.com/hcl/

Remove any newly installed hardware (RAM, adapters, hard disks, modems, and so on). Run any system diagnostics supplied by your computer manufacturer, especially the memory check. Disable BIOS memory options such as caching or shadowing.

 

[Guest_imported]

HELP. Anyone else had this problem? Thanks

UNEXPECTED_KERNAL_MODE_TRAP is the error.

Scott