DID CallerID

[kmerck]

Is there a way to change the name/number for a DID number that is coming down the same PRI circuit with other numbers? Currently, I have our telco provider to display our company's main number for all outgoing calls across the PRI. I need to basically have this one number display a different caller ID name and number. Any suggestions anyone?

 

[colby007]

Enter command 'change isdn public'



Ext Ext Trk CPN Total CPN
Len Code Grp(s) Prefix Len

4 2015 1 2079 4


My extension number is 2015 but to the outside world it's 2079.

Hope this helps.

Colby

 

[kmerck]

Colby,

Thanks for the suggestion. However, I believe I am stuck in my situation because of how I have the PRI setup. I don't want the rest of our DID's displayed to the public, so I have our main number shown for caller ID information. BellSouth tells me that we only have the 2 options.

 

[colby007]

This won't effect the rest of your DDI's you can put in the first nubmer of your extension range then give it the extension lenght (4), then the outgoing trunk group number, then the CPN prefix you want to display (then main number) this will display the main number for everyone going out on the specified trunk except for the extension you wish to change CLI.