Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dial-up Networking systray connection icon
- Thread starter SAM27
- Start date
The Dialup network connection is controlled through a program called rnaapp.exe in the C:\windows\system folder. It is activated when you start that connection. The status in the icon tray may be controlled be the modem driver. It is essentially a modem diagnostic. try this it may or may not work............
open up Windows Explorer->Dial Up Networking->Select the connection you make->right click and go to properties->Genereal - Connect Using should list a modem type, click Configure->go to Options->Status Control -if the tab is clicked, unclick it and hit okay. then go back and reclick it. If it is unclicked, click it and hit okay, then try to do a dialup connection..
you can also end the dialup connection by simply Ctrl + Alt + Del and closing Rnaapp
Email me if this works or not, i would like to know.....->
open up Windows Explorer->Dial Up Networking->Select the connection you make->right click and go to properties->Genereal - Connect Using should list a modem type, click Configure->go to Options->Status Control -if the tab is clicked, unclick it and hit okay. then go back and reclick it. If it is unclicked, click it and hit okay, then try to do a dialup connection..
you can also end the dialup connection by simply Ctrl + Alt + Del and closing Rnaapp
Email me if this works or not, i would like to know.....->
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question