DHCP for many interfaces

[MuanXi]

Topology:

router-switch-hosts

Betveen router an switch is a Trunk vith VLAN 10,20,30.

These VLANs are for hosts connected to a switch.

1) I need to enable DHCP server on router(no problem).

2) I need assign 3 different pools, to three VLANs.
Is it possible?

For example : FIRSTPOOL 192.168.1.0 /24 for hosts on VLAN10
SECONDPOOL 195.146.100.0 /24 for hosts on
VLAN20
THIRDPOOL 10.10.10.0 /24 for host on VLAN30

HOW CAN I DO THAT?

 

[lambent]

Assuming you'll reserve the first 30 addresses for each network, and assuming you're running 802.1q for the trunk on your switch:

!
ip dhcp excluded-address 192.168.1.1 192.168.1.30
ip dhcp excluded-address 195.146.100.1 195.146.100.30
ip dhcp excluded-address 10.10.10.1 10.10.10.30
!
ip dhcp pool FIRSTPOOL
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
domain-name firstpool.com
netbios-name-server 1.2.3.4
netbios-node-type h-node
dns-server 1.2.3.5 1.2.3.6
lease 30
!
ip dhcp pool SECONDPOOL
import all
network 195.146.100.0 255.255.255.0
default-router 195.146.100.1
domain-name secondpool.com
netbios-name-server 1.2.3.4
netbios-node-type h-node
dns-server 1.2.3.5 1.2.3.6
lease 30
!
ip dhcp pool THIRDPOOL
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
domain-name thirdpool.com
netbios-name-server 1.2.3.4
netbios-node-type h-node
dns-server 1.2.3.5 1.2.3.6
lease 30
!
interface f0/0
no ip address
speed 100
duplex full
no shut
!
interface f0/0.10
description VLAN10
encapsulation dot1Q 10
ip address 192.168.1.1 255.255.255.0
!
interface f0/0.20
description VLAN20
encapsulation dot1Q 20
ip address 195.146.100.1 255.255.255.0
!
interface f0/0.30
description VLAN30
encapsulation dot1Q 30
ip address 10.10.10.1 255.255.255.0
!
end

 

[lambent]

Forgot to tell you that I also assume you want to propagate WINS and DNS info to the DHCP clients such that WINS server = 1.2.3.4, DNS servers = 1.2.3.5 and 1.2.3.6