reillytucker
IS-IT--Management
Hi.
Have been getting loads of "Transient connection attempts errors". Weh this happens the phone has the message 'registering with ccm'....
It seems to happen randomly to a couple of 7960 IP phones (not all) connected via vpn. I can't work out what is causing this. The VPN's are very reliable. You can still ping the phone when this message occurs. Troubleshooted this one to death. Tried deleting phone from database/replaced phone. I'm sure this is a network issue. Its driving me nuts.
Application Log Error 3:-
Error: DeviceTransientConnection - Transient connection attempt.
Connecting Port: 2000
Device name [Optional].: SEP0015FA62A9B8
Device IP address.: 10.24.5.200
Device type. [Optional]: 7
Reason Code [Optional].: 1
App ID: Cisco CallManager
Cluster ID: SMP-CCM-01-Cluster
Node ID: 172.16.24.10
Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.
Recommended Action: No action is required if this event was issued as a result of a normal device rehome..
The phones that have the issues are on the end of a vpn to peoples homes. I know thats not great but I wasn't expecting it to be that unreliable.
The setup is:-
Main Office: Cisco PIX 515e ver 7.2.
Remote Home: Cisco 877w ver ios 12.4
Cisco CCM: 4.1(3)sr3c (in its on vlan/network)
Any ideas. Anything I should look at. You think its the PIX messing with the connection? Would it be better to terminate the home VPN's on our vpn3000 boxes? The reason code is unknown so thats not much help.
Any ideas? Cheers.
Have been getting loads of "Transient connection attempts errors". Weh this happens the phone has the message 'registering with ccm'....
It seems to happen randomly to a couple of 7960 IP phones (not all) connected via vpn. I can't work out what is causing this. The VPN's are very reliable. You can still ping the phone when this message occurs. Troubleshooted this one to death. Tried deleting phone from database/replaced phone. I'm sure this is a network issue. Its driving me nuts.
Application Log Error 3:-
Error: DeviceTransientConnection - Transient connection attempt.
Connecting Port: 2000
Device name [Optional].: SEP0015FA62A9B8
Device IP address.: 10.24.5.200
Device type. [Optional]: 7
Reason Code [Optional].: 1
App ID: Cisco CallManager
Cluster ID: SMP-CCM-01-Cluster
Node ID: 172.16.24.10
Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.
Recommended Action: No action is required if this event was issued as a result of a normal device rehome..
The phones that have the issues are on the end of a vpn to peoples homes. I know thats not great but I wasn't expecting it to be that unreliable.
The setup is:-
Main Office: Cisco PIX 515e ver 7.2.
Remote Home: Cisco 877w ver ios 12.4
Cisco CCM: 4.1(3)sr3c (in its on vlan/network)
Any ideas. Anything I should look at. You think its the PIX messing with the connection? Would it be better to terminate the home VPN's on our vpn3000 boxes? The reason code is unknown so thats not much help.
Any ideas? Cheers.