I have 4 VPN routers on the corporate network and i can access them ok from snmpc. Most of the time they are up and running but sometimes they lose connection because they are quite a way from the BT exchange. So i am trying to download a mib that will determine adsl signal strength and when it fails below a certain level it will alarm and i will know to ring BT as a fault.
I have added in the following 2 mibs below into the mib database and compiled on our SNMPc server.
Cisco-Adsl-Cap-Line-Mib
Cisco-Adsl-Dmt-Line-Mib
I'm not too sure if i have got the correct mib's though because even though i can create a report it doesnt show any instances - it says there are no counters in this table
Any ideas?
I have added in the following 2 mibs below into the mib database and compiled on our SNMPc server.
Cisco-Adsl-Cap-Line-Mib
Cisco-Adsl-Dmt-Line-Mib
I'm not too sure if i have got the correct mib's though because even though i can create a report it doesnt show any instances - it says there are no counters in this table
Any ideas?