DEPLOYMENT SERVER???

[wilamy]

In the initial installation of Linux Base, during installation on the screen question:

"DEPLOYMENT SERVER:
Do you wish to configure as the deploymente This System server: (Y/N) {N}?

we set as NO,

my question is, can install the Deployment Server independently, without having to reinstall the Linux Base.?


And if we have to reinstall everything, we can make a backup and restore everything at once. To not affect the service?

 

[allenmac]

Your deployment server should be configured on the Primary UCM security server.

You only need one instance for a UCM security domain.

 

[M1spezi]

No! you have to reinstall Linux Base.
What do you want to backup?

Meridian, Callpilot, CCM (Symposium) from Germany

 

[KCFLHRC]

You should still be able to go into local deployment on each individual server.

 

[wilamy]

Thanks for your responses.

Someone could tell me the way to the UCM, how to install the Deployment as an individual server.

 

[KCFLHRC]

To get to local deployment you put in the IP address of the server followed by local-login in your IE browser.

 

[KCFLHRC]

It would look like this

137.135.128.250/local-login

Then login with your credentials and you should see deployment. You will also need the NAI file to deploy

 

[wilamy]

Thanks KCFLHRC, I have the CS1000 up, if I load the .NAI again and deployed, it affects the service?

 

[KCFLHRC]

What are you actually trying to do? It may affect service if you are running IP services either phones or trunks. If this is a VxWorks CS and you have all TDSM phones you should be fine. If it's CoRes all bets are off.