Demo R7 Kit to 9.1 Process?

[bheaney]

Hi Gents, I've looked around but there are so many contradictory answers on the subject so I figured it's better to just ask.
I have a new V2 carrier (PCS14) with a Demo R7 Kit that someone gave as a gift.
Looking to upgrade it to 9.1. I don't think I have to expand the memory as the carrier is PCS14 but I'm confused about which licenses I require.
Any help is appreciated. Thank you.

 

[bheaney]

Btw, these are the licenses on the CD if it helps to answer any questions. Thanks again.
IPO LIC PREFRD (VM PRO) RFA LICS
IPO LIC - IP400 IPSec VPN RFA
IPO LIC R6 ADV EDITION
IPO LIC - IP400 VPIM RFA
IPO LIC R6 TELEWORKER 5
IPO LIC - IP400 AUDIX RFA
IPO LIC- IP400 CTI RFA
IPO LIC R6 MOBILE WORKER 5
IPO LIC R6 OFF WORKER 5
IPO LIC R6 PWR USER 5
IPO LIC R6 AV IP ENDPOINT 5
IPO LIC CUSTMR SVC AGT RFA 5 LIC:CU
IPO LIC SIP TRNK RFA 5
IPO LIC IP500 VCE NTWKG ADD 4 LIC:CU
IPO LIC - IP400 TAPI WAV RFA 4
IPO LIC- IP400 CTI RFA
IPO LIC RECEPTIONIST RFA 1 LIC:CU
IPO LIC R6 ADV EDITION
IPO LIC - IP400 AVAYA TTS RFA 1

 

[jamie77]

You need to go to your Disty/Avaya CAM for upgrade licenses and any other new licenses you want to add to it.

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer

 

[holdmusic34]

Why 9.1 if it's a demo kit? Current release is 10.0 sp1

IP Office Power Demo Upgrades
In order to upgrade an existing IP500 V2 demo system from R9.1 or prior to R10.0, the steps below must be followed. Partners will purchase new R10 PLDS licenses at a token nominal cost. There is no separate demo license upgrade order code.

With the upgrade to R10 there has been a switch from standard production licenses to nonproduction
licenses. What this means is that any demo system that has been enhanced in the
past with additional licenses will no longer recognize the additional licenses that were added
prior to the R10 upgrade.

1. Download and Upgrade IPO R10 Software via IP Office Manager or Web Manager
2. Purchase and Activate via PLDS - A1S/MPM order GDPP IP Office Software Package – R10
As of R10, the PLDS host ID used for the license file must match the 12 digit PLDS ID printed on the SD card label. The existing older demo system SD card can be re-used for license management. Older SD cards will have a 10 digit feature key serial number shown by FK or FK SN. For those cards, add the prefix “11” to the front of the 10 digit serial # to get the new 12 digit PLDS Host ID.
Alternately an SD card replacement may be done by purchasing a new SD card and returning the old demo SD card to Avaya containing the previously acquired ADI licenses.
The material code for a new SD card is listed below. Purchase the correct version based on the geographical location of the demo system, following the standard A1S SSR/SBA process.

700479702
IPO IP500 V2 SYS SD CARD A-Law
International

700479710
IPO IP500 V2 SYS SD CARD MU-Law
NA

So, get your ADI licenses to PLDS on the correc FL number first or they'll be borked when you put the new production license in.

this time you gave me a mountain

 

[Pepp77]

If its a brand new chassis then you dont need an upgrade licence, just set it up on the software version you want and ensure you have an essential edition licence.

| ACSS SME |