iaphoneman
MIS
Trying to connect a network printer and have it be the system printer to schedule BCMS reports? Can anyone help?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Definty LAN Printer 1
- Thread starter iaphoneman
- Start date
- Status
-
1
- #2
What version is the PBX? If R9 and above, you need to add a node name:
change node-names ip Page 1 of 1 SPE A
IP NODE NAMES
Name IP Address Name IP Address
printer 10 .10 .10 .55 . . .
add the service (port 9100 works for HP printers) :
change ip-services Page 1 of 2 SPE A
IP SERVICES
Service Enabled Local Local Remote Remote
Type Node Port Node Port
SAT y ethernet2 5111 any 0
SYS_PRNT ethernet2 0 printer 9100
Change the system parameters screen:
change system-parameters features Page 4 of 12 SPE A
FEATURE-RELATED SYSTEM PARAMETERS
SYSTEM PRINTER PARAMETERS
System Printer Endpoint: SYS_PRNT Lines Per Page: 60
-CL
change node-names ip Page 1 of 1 SPE A
IP NODE NAMES
Name IP Address Name IP Address
printer 10 .10 .10 .55 . . .
add the service (port 9100 works for HP printers) :
change ip-services Page 1 of 2 SPE A
IP SERVICES
Service Enabled Local Local Remote Remote
Type Node Port Node Port
SAT y ethernet2 5111 any 0
SYS_PRNT ethernet2 0 printer 9100
Change the system parameters screen:
change system-parameters features Page 4 of 12 SPE A
FEATURE-RELATED SYSTEM PARAMETERS
SYSTEM PRINTER PARAMETERS
System Printer Endpoint: SYS_PRNT Lines Per Page: 60
-CL
- Status
Similar threads
- Locked
- Question
- Locked
- Question