Notes for testing mct activation / deactivation:
The 01 in the Trace_tbl at offset 0xb4 for any of the 16 records indicates that
the mct-act has never been acknowledged by the mct-controlling station for that
trace request. In the above example 2 stations have not been acknowledged.
activator 1 presses mct-act (flashing) .
on controller set - mct-ctrl (rings once then flashing).
activator 2 presses mct-act (flashing) .
on controller set - mct-ctrl (rings once continues flashing).
controller has not pressed mct-control - mct-ctrl (continues flashing).
when controller presses mct-ctrl the first time activator 1 mct-act (steady led)
and controller set mct-ctrl (continues flashing).
pressing mct-ctrl repeatedly steps through display info for the traced call
activated by activator 1. It will continue to do this until the controller dials
the de-activate code.
Controller goes off-hook on call-appr and dials de-activate code and activator 1
mct-act (led goes dark).
when controller presses mct-ctrl now, activator 2 mct-act (steady led)
and controller set mct-ctrl (stops flashing and goes steady).
Controller goes off-hook on call-appr and dials de-activate code and activator 2
mct-act (led goes dark) and controller mct-ctrl (led goes dark).
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
