Defining parm in ld 97

[hdsingh]

Hi Guys

Can Anyone help me. I have opt 11c . When i do fsum all in
ld 32. it doesnt print anything. the manual says we have to define parm in ld 97. Please help

Regards
Hdsingh

 

[johnpoole]

here's the parm from an 81c, don't know if it will help

REQ  PRT
TYPE PARM
SCH0111

TYPE SYSP

INTN = NO
QUIET CODE  0
THRESHOLDS  00004  00004
FLASH TIMER 120
TOHV 250
TDP 15
TID 150
TDPON 150
TPF 200
XTRK MAKE/BREAK RATIO (PPS10) = 050
XTRK MAKE/BREAK RATIO (PPS12) = 050
XTRK MAKE/BREAK RATIO (PPS20) = 050

            FAST DOWNLOAD CONTROL TABLE

CARD TYPE  DOWNLOAD OPTION  VERSION TYPE  VERSION #

  XNET       CONDITIONAL      CURRENT        **
  LCRI       CONDITIONAL      CURRENT        **
  XPEC       CONDITIONAL      CURRENT        **
  XNPD       CONDITIONAL      CURRENT        **
  FNET       CONDITIONAL      CURRENT        **
  FPEC       CONDITIONAL      CURRENT        **

john poole
bellsouth business
columbia,sc

 

[doc053]

Ld 97
at REQ enter CHG
at Type enter FDL
at FDTP enter ALL

then just return through the rest of the prompts. The LD 32 fsum only checks those 3900 sets whose type is defined in 97. If you set the FDTP to all, it will check all types. Once you set this, you should be good to go.