Dedicate bandwith

[boymarty24]

Hello,

Here is a easy question for you...

I have a point to point router setup. On each side of the routers I have servers that i need to dedicate a certain amount of bandwith. Like this...

server1--cisco3600---cisco3600--server2

Server1 and server2 need 784 kbit of a 4 mbit line

Is their a easy way to solve this ( problaby yes... )


//Marty

 

[chieftan999]

You will need to use Traffic Shaping, Queuing Strategies (maybe RSVP) and QoS.

Use priority lists for priority queuing and then assign to the interface.

Use rate limiting for exact bandwidth requirements. Look up at the cisco website for rate limiting or complete a search here.

The cisco site is

http://www.cisco.com

 

[thebruge]

You could try CBWFQ, whereby you can give certain bandwidths to user-defined classes of traffic:

-

http://www.cisco.com/go/qos

-

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a00800bd8f0.html

HTH, Rich

 

[boymarty24]

Thanks!

I will look at this tonight!

//Marty