DECT590 1

[benaja75]

Hello;
Some of my DECT PHONES are causing me disaster.
I use the same procedure for subscribtion but it fail.
I checked and I find that the two have the same first five digit (IPEI) 03647.
So I'm wondering if it's a serie probleme.
Cheers

 

[etompau]

No. DECT handset can have some of the digits in common as the IPEI contains information about the manufacturer of the handset.

 

[benaja75]

Sorry
I dont understand what you are meaning.

 

[doktor]

Your DECT handset have different IPEI numbers! All of them.
An IPEI number is a 13 digit unique "serial" number for each DECT handset.
Check the next post to learn more about IPEI numbers.

///doktor

 

[doktor]

thread806-497350: MD110 & SIEMENS GIGASET UNKNOWN IPEI .

///doktor

 

[benaja75]

Hi dockor
I read the post and I think my question still remain.
NANSI wrote EMC for DT570 is 00570.I checked it and I find it correct.
I'm used with DT590 and I remember that most of them display 00593 as EMC. So I dont understand this 03647 of these two set and why they cannot when I use the given IPEI (*#06#) .
Thinks

 

[doktor]

Please post the IPEI code for both DECT handsets. Use *#06# to see the IPEI in the display.

///doktor

 

[benaja75]

0364700927304 AND 0364700918149

 

[doktor]

OK.
Here are the MD110 commands to initiate these 2 DECT handsets...
First a generic profile and a generic number must be initiated (e.g. 1000 and 1001):
GESPI:CSP=0,TRAF=0103071514,SERV=2050710101301,
ROC=222201,NPRES=0011,CDIV=00013210;

GEDIIIR=1000&1001,LIM=1,CSP=0;

Then:

CXAKIIR=1000,IPEI=0364700927304,AUTKEY=1234;
and

CXAKIIR=1000,IPEI=0364700918149,AUTKEY=1234;

Hereafter the 2 DECT handsets must be registered.

///doktor

 

[benaja75]

Hu docktor,

Tell me if the IPEI is link to the GESPI paramaters.

 

[benaja75]

I tried but the same problem.

 

[TeleLion]

How do you actually register the handsets, try not to enter anything when registering the hand set except for the pin code 1234.

TELEC3

 

[etompau]

Have you considered the possibility that the phones might be defective?

 

[benaja75]

First I considered that the sets,then I fund strang the IPEI cause I'm used with EMC 00593, for DT590, that why I sent this post to if I can get another explanation.
The things is it has registered the first time and one week later it lost the signal, then it display searching .

 

[whosrdaddy]

Are this the only DECTS that are having problems?

what version are you running?

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[benaja75]

Yes, only tohse 2 with the IPEI I sent.
version of what? CXP1010101/40TSWSP04/R5A

 

[benaja75]

sorry
CXP1010101/4/TSWSP04/R5A

 

[whosrdaddy]

Yes I meant MD110 version.
Then I must agree with etompau (he really knows this stuff), return the DECTS as faulty.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[benaja75]

Thanks guys

 

[doktor]

!I must ALSO agree with "whosrdaddy" -> "etompau" really knows the DECT stuff - he is the number one!!

///doktor