Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

de-install option 11

Status
Not open for further replies.

flori1

Technical User
Dec 21, 2004
97
US
tomorrow I will be Deinstalling a dual cabinet option 11,my question is:are they wall mounted with a Bracket... similar to a Nortel MICS? Or screw mounted from inside the cabinet,Ive never installed or even had to move one,just adds ,moves and changes forever.

Thanks,
Bob
 
Their like a MICS but check on the inside of the cabinet, I have had techs make sure that it wasn't coming off the wall and add a few screws in there

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
It should be two screws that are accessible from inside the cabinet that are found at the bottom left and right corners. Once they are removed, you should just need to slide the cabinet upwards to take it off the metal bracket.

They can be heavy and I would advise you to remove all the cards and power unit first to make the job easier. Also don't forget to remove any of the fibre and connecting cables that would probably go to your wiring frame.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top