matthewk24
MIS
We do not utilize this function and I would like to remove the card. How do I do so properly?
Thanks,
m
Thanks,
m
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
De-administer LAN card 1
- Thread starter matthewk24
- Start date
- Status
-
1
- #3
If it is a 250 just go to menu 13-11 and put in the number of the card slot it is showing in and busy it out and remove it.
The same for a 350.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
The same for a 350.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #5
matthewk24
MIS
Doh! Sytem type would help eh! It is a 250.
Thanks Ken. I had done that but did not know if I could just remove the board at that point.
Thanks Ken. I had done that but did not know if I could just remove the board at that point.
- Status
Similar threads
- Locked
- Question