DDS CSU DSU t1 wic and bears oh my?

[jasoniwmr]

Ok here it is I can set up a t1 no issue....
For my home lab I have a dds a Paradyne CSU dsu and 2 2600's. One 2600 has a t1 wic.

My goal is to get at least the paradyne and the t1 wic to work together back to back so I can learn the finer points of t1's.

I have made and teste the t1 crossover.

I have goten as far as getting DCD=up DSR=up DTR=up RTS=up CTS=up.

But the interface is still down, and yes there is the no shut.

 

[plshlpme]

have you set the clock source on both sides?

one to line and one to internal?

 

[jneiberger]

DDS is 56/64K technology. It is not compatible with T1. If you have a DDS CSU/DSU then you will not be able to get it to connect to a T1 interface of any variety. They're completely different.

 

[VoIPGuyNSC]

jneiberger, read the post again. He is trying to get the Paradyne and T1 wic working, not the DDS. And I agree with plshlpme. So often this step is overlooked when doing crossover connections.

John Lever
Telecommunications
Richland School District Two

 

[jneiberger]

I thought he meant that he had a Paradyne DDS CSU/DSU. If that's not the case, ignore my post.