Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DCS Centralized attendant setup

Status
Not open for further replies.
ezbear

ezbear

IS-IT--Management
Sep 24, 2006
6
US
Currently I have Dcs working between two Definity's both are R9.5
exension dialing is working between the two.

i would like to set up a central attendant, will the BLF field work at principal attendant?

Also on switch 2 how do I point to the attendent on switch one.
DCS trunk group is set to type A does it need to be change to B for QSIG?

Currently there are no local trunks on switch 2 wat is the best way to grab a outgoing trunk on switch 1
 
Status
Not open for further replies.

Similar threads

hymanchen
  • Question
dial 0 not display attendant name or attendant extension
Replies
2
Views
241
hymanchen
hymanchen
rtsoi
  • Locked
  • Question
Attendant Coverage to VDN
Replies
3
Views
336
Bill P
Bill P
RedTech443
  • Locked
  • Question
IX Attendant Auto Config
Replies
0
Views
322
RedTech443
RedTech443
Richard_Harrow
  • Locked
  • Question
DB and LIC error showing on One-X attendant after installation
Replies
0
Views
577
Richard_Harrow
Richard_Harrow
lopes1211
  • Locked
  • Question
How is CMS HA Setup?
Replies
1
Views
564
avAyATEKky
avAyATEKky

Part and Inventory Search

Sponsor

Back
Top