DCH054 error message

[texan01]

I keep getting these messages but customer doesn't complain of any service interruption. It actually happens on an Option 11 on rel 4.5 and a CS1000E on rel 5.5. They both have TMDI cards and it usually happens between 3-5 am. Any thing for me to be worried about and any ideas why it's happening. No other errors, thanks for any imput on this.

TIM000 05:00 9/8/2010 CPU 0
%
% AUD000
%
% DCH054 DCH: 12 EST REMOTE TIME: 5:28:50 8/09/2010
%
% AUD000
%
% TIM000 06:00 9/8/2010 CPU 0
%
% AUD000

 

[PERRYPJ]

Check LD 60
LCNT to see if there are any errors, because your DCH Released and RE-ESTABLISHED

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[texan01]

I don't see anything LCNT, no slips or nothing. Shouldn't I get a DTI, or DTA error message also??

 

[PERRYPJ]

If you see nothing the problem is most likely on your XMIT side, the LCNT only looks at the REC side

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[texan01]

So does it sound like a Telco or PBX problem. Funny how two different systems do the exact same thing around the same time.

 

[texan01]

Here the CS1000E error message.


IM000 04:15 9/8/2010 CPU 0
%
% DCH054 DCH: 1 EST REMOTE TIME: 4:32:45 9/08/2010
%
% AUD000
%
% DCH054 DCH: 0 EST REMOTE TIME: 4:39:49 9/08/2010
%
% TIM000 05:00 9/8/2010 CPU 0
%

 

[PERRYPJ]

Are you telling everything, like are these 2 switches tied together by this T1

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[texan01]

No, two totally seperate systems. Two different customers.

 

[janaya]

Yup. I got three of these. CS1000M / 61C systems, running succession 5.5. All get the same thing, but no drop in service and about 2 hours after the midnight routine.

Same error message on thier PRI ciruits.

 

[texan01]

Thanks, I was wondering if more than just mine were doing it. I have three more swithes but they don't have TMDI cards.