Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DBC 4187 1
- Thread starter dbis
- Start date
-
1
- #2
You have to set parameter ICAT=8000100 on that extension. You have to know what type of signaling works on your phone. I think that Dialog 4187 offers you display of calling name and number using FSK or optionally calling number using DTMF signaling.
In parameter ICAT of the EXTEI command, digit D1 must be more than 8 and digit D5 must be set to 1 for DTMF signaling. Default D5 value 0 means FSK signaling.
Just set parameter ICAT=8000100 in EXCAC command for that extension.
Of course, your analog card have to support CID function(ELU34)!
I hope that you understood me. My english is bad,
In parameter ICAT of the EXTEI command, digit D1 must be more than 8 and digit D5 must be set to 1 for DTMF signaling. Default D5 value 0 means FSK signaling.
Just set parameter ICAT=8000100 in EXCAC command for that extension.
Of course, your analog card have to support CID function(ELU34)!
I hope that you understood me. My english is bad,
- Status
Similar threads
