Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Datapulse Operator Gateway - Night Service

Status
Not open for further replies.
sl1input

sl1input

Technical User
Joined
Apr 17, 2006
Messages
233
Location
GB
Hi

Has anyone had experiences with the Datapulse Operator Gateway??

If so how do you put one into Night Service so that calls follow the NIT_DATA > NIT 1 prompt.

Can't seem to find it anywhere and not in documentation either.

Thanks.
 
Sort by date Sort by votes
Just set to Busy when the last operator on the switch goes BUSY it should go into night service
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

phonetech2012
  • Locked
  • Question Question
Phantom internal calls to operator console
Replies
4
Views
564
joe_z
joe_z
pook9924.
  • Locked
  • Question Question
Port is out of service - port is in service - No carrier detected
2
Replies
21
Views
2K
Firebird Scrambler
Firebird Scrambler
J0rg31u1s
  • Locked
  • Question Question
operator cue
Replies
0
Views
224
J0rg31u1s
J0rg31u1s
nmcmo
  • Locked
  • Question Question
PRI issue with channels in MBSY state - Meridian Opt 11 and Cisco Voice Gateway (E1)
Replies
2
Views
339
nmcmo
nmcmo
PHXAZ
  • Locked
  • Question Question
CS1000 need to forward night DN to cell phone not working
Replies
2
Views
260
KCFLHRC
KCFLHRC

Part and Inventory Search

Sponsor

Back
Top